www.joyetv.com

High-quality hot sell RX GASKET

33

High-quality hot sell RX GASKET

RX ring gaskets are similar in shape to the standard octagonal ring joint gasket, but their cross section is designed to take advantage of the contained fluid pressure in effecting a seal. They are made to API 6A and interchangeable with standard octagonal rings. RX is suitable for pressures up to 5,000 psi. Standard sizes are stocked in low carbon steel, 304 and 316. RX Ring Joint Gasket The Style RX is an adaptation of the standard Style R which is energized when the assembly is pressurised. The RX is designed to fit the same groove design as a standard Style R, making the joints interchangeable, however consideration should be given to the difference in finished make up distance. The geometry of this modified design induces a pressure energising effect when the assembly is pressurised, improving the efficiency of the seal. Surface finish of the Style RX Ring Type Joint sealing faces (23° angled faces) shall not be greater than 1.6 μm Ra /63 μin RMS.…