www.joyetv.com

Self-Aligning Idler with guide roller

32

Self-Aligning Idler with guide roller

This form of aligning idler mainly has two wing rollers, which are mainly connected with the aligning bracket, and the wing roller is installed on both sides of the conveyor belt to prevent the conveyor belt from running off. That is to say, when the belt deviates, one side wing roller is squeezed, the wing roller rotates around the rotating shaft on the rotating mechanism through the moving rod, the rotating shaft drives the tie rod to rotate, and the final tie rod drives the whole idler set to rotate at an angle, making the belt run smoothly and reliably, the alighting effect is remarkable, and the structure is simple, which can fully meet the needs of modern operation development. When the position of belt is changed from its center line on the plane ,the whole carrier makes a rotating motion round the center shaft of training idler ,and allows the belt to return to the center of the conveyor. The distinguishing feature of this machine is in its infallible ability to p…